The following instructions explain how to set-up Windows 98 to dial and connect to Tellurian Networks.

1. Double-click the My Computer icon.

2. Double-click Dial-Up Networking.

3. Double-click Make New Connection.

4. Delete the contents of the Type a name for the computer you are dialing field, and type Tellurian Networks.

5. Click [ Next > ]

6. For Telephone Number, enter the Tellurian Networks access number you have been given. Note: if you have to dial the area code to place local calls, enter the area code directy in front of the 7 digit number, NOT in the box labeled Area Code.

7. Click [ Next > ]

8. Click [ Finish ]

9. Right-Click the Tellurian Networks icon, and click Properties.

10. On the General tab, uncheck Use area code and dialing properties.

IMPORTANT! The phone number displayed below is an example only, please click here to find an access number that is a local non-toll number for you.

11. Click on the Server Types tab.

12. The only item that needs to be checked under "Advanced options:" is "Enable software compression".

13. The only item that needs to be checked under "Allowed network protocols:" is "TCP/IP".

14. Click [ TCP/IP Settings... ].

14. Make sure that the first two options are set to "Server assigned...". Both "Use IP header compression" and "Use default gateway on remore network" should be checked.

15. Click [ OK ] and then click [ OK ] again.

16. Once again, right-click the Tellurian Networks icon and click Create Shortcut.

17. When asked if you would like to place a shortcut on the desktop, click [ Yes ].

Copyright © 1995-2010 Tellurian Networks, Inc., 172 Spring Street, Newton NJ 07860
Main Office: 888-TELLURIAN (US only) -or- 973-300-9211

URL:

http://www.rtonline.net/connect/windows-98.asp

Date:

9/8/2010 6:28:07 PM (server local time)